0

ATV310H075N4E

SKU:ATV310H075N4E

Price upon request

  • Product is not available

-
+
Send Enquiry

Minimum Order Quantity1

Accept Small Orders No

Variable speed drive ATV310 - 0.75 kW - 1 hp - 380...460 V - 3 phase
Add to Wishlist Remove Wishlist Add to Compare

  • Additional Information

    Main
    range of product
    Easy Altivar 310
    		  
    product or component type
    Variable speed drive
    		  
    product specific application
    Simple machine
    		  
    assembly style
    With heat sink
    		  
    device short name
    ATV310
    		  
    network number of phases
    Three phase
    		  
    [Us] rated supply voltage
    380...460 V - 15...10 %
    		  
    motor power kW
    1.5 kW
    		  
    motor power hp
    2 hp
    		  
    noise level
    50 dB
    		  
    Complementary
    product destination
    Asynchronous motors
    		  
    quantity per set
    Set of 1
    		  
    EMC filter
    Without EMC filter
    		  
    type of cooling
    Integrated fan
    		  
    supply frequency
    50/60 Hz +/- 5 %
    		  
    communication port protocol
    Modbus
    		  
    connector type
    RJ45 (on front face) for Modbus
    		  
    physical interface
    2-wire RS 485 for Modbus
    		  
    transmission frame
    RTU for Modbus
    		  
    transmission rate
    4800 bit/s
    9600 bit/s
    19200 bit/s
    38400 bit/s
    		  
    number of addresses
    1…247 for Modbus
    		  
    communication service
    Read holding registers (03) 29 words
    Write single register (06) 29 words
    Write multiple registers (16) 27 words
    Read/write multiple registers (23) 4/4 words
    Read device identification (43)
    		  
    line current
    5.4 A
    		  
    apparent power
    4.3 kVA
    		  
    prospective line Isc
    5 kA
    		  
    continuous output current
    4.1 A at 4 kHz
    		  
    maximum transient current
    6.2 A for 60 s
    		  
    power dissipation in W
    51.82 W at In
    		  
    speed drive output frequency
    0.5…400 Hz
    		  
    nominal switching frequency
    4 kHz
    		  
    switching frequency
    2...12 kHz adjustable
    		  
    speed range
    1…20
    		  
    transient overtorque
    170…200 % of nominal motor torque depending on drive rating and type of motor
    		  
    braking torque
    Up to 150 % of nominal motor torque with braking resistor at high inertia
    Up to 70 % of nominal motor torque without braking resistor
    		  
    asynchronous motor control profile
    Energy saving ratio
    Quadratic voltage/frequency ratio
    Sensorless flux vector control
    		  
    motor slip compensation
    Adjustable
    Preset in factory
    		  
    output voltage
    380...460 V three phase
    		  
    electrical connection
    Terminal, clamping capacity: 1.5...2.5 mm² (L1, L2, L3, PA/+, PB, U, V, W)
    		  
    tightening torque
    0.8…1 N.m
    		  
    insulation
    Electrical between power and control
    		  
    supply
    Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection
    Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection
    		  
    analogue input number
    1
    		  
    analogue input type
    Configurable current AI1 0...20 mA 250 Ohm
    Configurable voltage AI1 0...10 V 30 kOhm
    Configurable voltage AI1 0...5 V 30 kOhm
    		  
    discrete input number
    4
    		  
    discrete input type
    Programmable LI1...LI4 24 V 18...30 V
    		  
    discrete input logic
    Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
    Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
    		  
    sampling duration
    10 ms for analogue input
    20 ms, tolerance +/- 1 ms for logic input
    		  
    linearity error
    +/- 0.3 % of maximum value for analogue input
    		  
    analogue output number
    1
    		  
    analogue output type
    AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits
    AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
    		  
    discrete output number
    2
    		  
    discrete output type
    Logic output LO+, LO-
    Protected relay output R1A, R1B, R1C 1 C/O
    		  
    minimum switching current
    5 mA at 24 V DC for logic relay
    		  
    maximum switching current
    2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay
    4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay
    		  
    acceleration and deceleration ramps
    U
    Linear from 0...999.9 s
    S
    		  
    braking to standstill
    By DC injection, <30 s
    		  
    protection type
    Line supply overvoltage
    Line supply undervoltage
    Overcurrent between output phases and earth
    Overheating protection
    Short-circuit between motor phases
    Against input phase loss in three-phase
    Thermal motor protection via the drive by continuous calculation of I²t
    		  
    frequency resolution
    Analog input: converter A/D, 10 bits
    Display unit: 0.1 Hz
    		  
    time constant
    20 ms +/- 1 ms for reference change
    		  
    operating position
    Vertical +/- 10 degree
    		  
    height
    151 mm
    		  
    width
    105 mm
    		  
    depth
    143 mm
    		  
    net weight
    1.1 kg
    		  
    Environment
    electromagnetic compatibility
    Electrical fast transient/burst immunity test - test level: level 4 conforming to EN/IEC 61000-4-4
    Electrostatic discharge immunity test - test level: level 3 conforming to EN/IEC 61000-4-2
    Immunity to conducted disturbances - test level: level 3 conforming to EN/IEC 61000-4-6
    Radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to EN/IEC 61000-4-3
    Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
    Surge immunity test - test level: level 3 conforming to EN/IEC 61000-4-5
    		  
    standards
    EN/IEC 61800-5-1
    EN/IEC 61800-3
    		  
    IP degree of protection
    IP20 without blanking plate on upper part
    IP41 top
    		  
    pollution degree
    2 conforming to EN/IEC 61800-5-1
    		  
    environmental characteristic
    Dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3
    Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
    		  
    shock resistance
    15 gn conforming to EN/IEC 60068-2-27 for 11 ms
    		  
    relative humidity
    5…95 % without condensation conforming to IEC 60068-2-3
    5…95 % without dripping water conforming to IEC 60068-2-3
    		  
    ambient air temperature for storage
    -25…70 °C
    		  
    ambient air temperature for operation
    -10…55 °C without derating
    55…60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C
    		  
    operating altitude
    <= 1000 m without derating
    		  
    Packing Units
    Unit Type of Package 1
    PCE
    		  
    Number of Units in Package 1
    1
    		  
    Package 1 Weight
    2.27 kg
    		  
    Package 1 Height
    19 cm
    		  
    Package 1 width
    19 cm
    		  
    Package 1 Length
    23 cm
    Adjustable
    Preset in factory
      output voltage
    380...460 V three phase
      electrical connection
    Terminal, clamping capacity: 1.5...2.5 mm² (L1, L2, L3, PA/+, PB, U, V, W)
      tightening torque
    0.8…1 N.m
      insulation
    Electrical between power and control
      supply
    Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection
    Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection
      analogue input number
    1
      analogue input type
    Configurable current AI1 0...20 mA 250 Ohm
    Configurable voltage AI1 0...10 V 30 kOhm
    Configurable voltage AI1 0...5 V 30 kOhm
      discrete input number
    4
      discrete input type
    Programmable LI1...LI4 24 V 18...30 V
      discrete input logic
    Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
    Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
      sampling duration
    10 ms for analogue input
    20 ms, tolerance +/- 1 ms for logic input
      linearity error
    +/- 0.3 % of maximum value for analogue input
      analogue output number
    1
      analogue output type
    AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits
    AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
      discrete output number
    2
      discrete output type
    Logic output LO+, LO-
    Protected relay output R1A, R1B, R1C 1 C/O
      minimum switching current
    5 mA at 24 V DC for logic relay
      maximum switching current
    2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay
    4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay
      acceleration and deceleration ramps
    U
    Linear from 0...999.9 s
    S
      braking to standstill
    By DC injection, <30 s
      protection type
    Line supply overvoltage
    Line supply undervoltage
    Overcurrent between output phases and earth
    Overheating protection
    Short-circuit between motor phases
    Against input phase loss in three-phase
    Thermal motor protection via the drive by continuous calculation of I²t
      frequency resolution
    Analog input: converter A/D, 10 bits
    Display unit: 0.1 Hz
      time constant
    20 ms +/- 1 ms for reference change
      operating position
    Vertical +/- 10 degree
      height
    151 mm
      width
    105 mm
      depth
    143 mm
      net weight
    1.1 kg
     
    Environment
    electromagnetic compatibility
    Electrical fast transient/burst immunity test - test level: level 4 conforming to EN/IEC 61000-4-4
    Electrostatic discharge immunity test - test level: level 3 conforming to EN/IEC 61000-4-2
    Immunity to conducted disturbances - test level: level 3 conforming to EN/IEC 61000-4-6
    Radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to EN/IEC 61000-4-3
    Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
    Surge immunity test - test level: level 3 conforming to EN/IEC 61000-4-5
    		  
    standards
    EN/IEC 61800-5-1
    EN/IEC 61800-3
    		  
    IP degree of protection
    IP20 without blanking plate on upper part
    IP41 top
    		  
    pollution degree
    2 conforming to EN/IEC 61800-5-1
    		  
    environmental characteristic
    Dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3
    Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
    		  
    shock resistance
    15 gn conforming to EN/IEC 60068-2-27 for 11 ms
    		  
    relative humidity
    5…95 % without condensation conforming to IEC 60068-2-3
    5…95 % without dripping water conforming to IEC 60068-2-3
    		  
    ambient air temperature for storage
    -25…70 °C
    		  
    ambient air temperature for operation
    -10…55 °C without derating
    55…60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C
    		  
    operating altitude
    <= 1000 m without derating
    		  
    Packing Units
    Unit Type of Package 1
    PCE
    		  
    Number of Units in Package 1
    1
    		  
    Package 1 Weight
    2.27 kg
    		  
    Package 1 Height
    19 cm
    		  
    Package 1 width
    19 cm
    		  
    Package 1 Length
    23 cm

  • Reviews ()

    Write a Review