ATV71HD75N4

Main range of product product or component type product specific application component name motor power kW motor power hp maximum motor cable length power supply voltage network number of phases line current EMC filter assembly style apparent power prospective line Isc nominal output current maximum transient current output frequency nominal switching frequency switching frequency asynchronous motor control profile type of polarization

Altivar 71
Variable speed drive
Complex, high-power machines
ATV71
75 kW, 3 phases at 380...480 V
100 hp, 3 phases at 380...480 V
100 m shielded cable 200 m unshielded cable
380...480 V - 15...10 %
3 phases
137 A for 480 V 3 phases 75 kW / 100 hp 167 A for 380 V 3 phases 75 kW / 100 hp
Integrated
With heat sink
109.9 kVA at 380 V 3 phases 75 kW / 100 hp
22 kA for 3 phases
124 A at 2.5 kHz 460 V 3 phases 75 kW / 100 hp 160 A at 2.5 kHz 380 V 3 phases 75 kW / 100 hp
240 A for 60 s 3 phases 75 kW / 100 hp 264 A for 2 s 3 phases 75 kW / 100 hp
0.1…500 Hz
2.5 kHz
1...16 kHz adjustable 2.5...16 kHz with derating factor
ENA (Energy adaptation) system for unbalanced loads Voltage/frequency ratio (2 or 5 points) Flux vector control (FVC) with sensor (current vector) Sensorless flux vector control (SFVC) (voltage or current vector)
No impedance for Modbus

Complementary product destination power supply voltage limits power supply frequency power supply frequency limits speed range speed accuracy torque accuracy transient overtorque braking torque frequency resolution communication port protocol connector type physical interface transmission frame transmission rate data format number of addresses method of access marking operating position height depth width net weight functionality specific application option card

Asynchronous motors Synchronous motors
323…528 V
50...60 Hz - 5...5 %
47.5...63 Hz
1…100 for asynchronous motor in open-loop mode, without speed feedback 1…1000 for asynchronous motor in closed-loop mode with encoder feedback 1…50 for synchronous motor in open-loop mode, without speed feedback
+/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
+/- 15 % in open-loop mode, without speed feedback +/- 5 % in closed-loop mode with encoder feedback
170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes 220 % of nominal motor torque +/- 10 % for 2 s
1 mOhm 500 V DC for 1 minute to earth
Analog input: 0.024/50 Hz Display unit: 0.1 Hz
CANopen Modbus
1 RJ45 (on front face) for Modbus 1 RJ45 (on terminal) for Modbus Male SUB-D 9 on RJ45 for CANopen
2-wire RS 485 for Modbus
RTU for Modbus
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal 9600 bps, 19200 bps for Modbus on front face 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
8 bits, 1 stop, even parity for Modbus on front face 8 bits, odd even or no configurable parity for Modbus on terminal
1…127 for CANopen 1…247 for Modbus
Slave CANopen
CE
Vertical +/- 10 degree
630 mm
290 mm
320 mm
44 kg
Full
Other applications
Communication card for CC-Link Controller inside programmable card Communication card for DeviceNet Communication card for Ethernet/IP Communication card for Fipio I/O extension card Communication card for Interbus-S Interface card for encoder Communication card for Modbus Plus Communication card for Modbus TCP Communication card for Modbus/Uni-Telway Overhead crane card Communication card for Profibus DP Communication card for Profibus DP V1

Environment noise level dielectric strength electromagnetic compatibility standards product certifications pollution degree IP degree of protection vibration resistance shock resistance relative humidity ambient air temperature for operation ambient air temperature for storage operating altitude

63.7 dB conforming to 86/188/EEC
3535 V DC between earth and power terminals 5092 V DC between control and power terminals
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
IEC 60721-3-3 class 3C1 EN 61800-3 environments 2 category C3 IEC 60721-3-3 class 3S2 EN/IEC 61800-3 EN/IEC 61800-5-1 UL Type 1 EN 61800-3 environments 1 category C3 EN 55011 class A group 2
NOM 117 UL CSA C-Tick GOST
2 conforming to EN/IEC 61800-5-1 3 conforming to UL 840
IP20
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
15 gn for 11 ms conforming to EN/IEC 60068-2-27
5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3
-10…50 °C (without derating)
-25…70 °C