0

XACB4916

SKU:XACB4916

Price upon request

  • Product is not available

-
+
Send Enquiry

Minimum Order Quantity1

Accept Small Orders No

Pendant station XAC-B - 4 pushbuttons + 1 emergency stop - power circuit - 12 A
Add to Wishlist Remove Wishlist Add to Compare

  • Additional Information

    Main
    range of product
    Harmony XAC
    		  
    product or component type
    Pendant control station
    		  
    device short name
    XACB
    		  
    Complementary
    enclosure material
    Glass reinforced polyester
    		  
    electrical circuit type
    Power circuit
    		  
    enclosure type
    Ready for use enclosure
    		  
    control station application
    Control of single speed hoist motor
    		  
    control station composition
    4 push-buttons + 1 emergency stop
    		  
    control button type
    Emergency stop push-button Ø 40 mm 3 NC trigger action
    First push-button 2-pole raise, slow
    Second push-button 2-pole lower, slow
    Fourth push-button 2-pole left, slow
    Third push-button 2-pole right, slow
    		  
    product compatibility
    XESD1191 for reversing operation
    XACS499 for emergency stop
    		  
    mechanical interlocking
    With mechanical interlocking between pairs
    		  
    control station colour
    Yellow
    		  
    connections - terminals
    Screw clamp terminals, 1 x 2.5 mm² with or without cable end
    Screw clamp terminals, 2 x 1.5 mm² with or without cable end
    		  
    standards
    EN/IEC 60947-5-5
    EN/IEC 60204-32
    EN/IEC 60947-5-1
    EN/ISO 13850: 2006
    CSA C22.2 No 14
    		  
    product certifications
    CSA
    		  
    protective treatment
    TH
    		  
    ambient air temperature for operation
    -25…70 °C
    		  
    ambient air temperature for storage
    -40…70 °C
    		  
    vibration resistance
    15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
    		  
    shock resistance
    100 gn conforming to IEC 60068-2-27
    		  
    overvoltage category
    Class II conforming to IEC 61140
    		  
    IP degree of protection
    IP65 conforming to IEC 60529
    		  
    IK degree of protection
    IK08
    		  
    mechanical durability
    1000000 cycles
    		  
    cable entry
    Rubber sleeve with stepped entry 10…22 mm
    		  
    [Ithe] conventional enclosed thermal current
    12 A
    		  
    [Ui] rated insulation voltage
    Emergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1
    600 V conforming to CSA
    		  
    [Uimp] rated impulse withstand voltage
    6 kV conforming to IEC 60947-1
    		  
    contact operation
    Snap action
    		  
    operating force
    17 N push-button
    40 N emergency stop
    		  
    short-circuit protection
    10 A fuse protection by cartridge fuse type aM
    		  
    rated power in hp
    2 hp at 240 V, CSA certified
    3 hp at 600 V, CSA certified
    5 hp at 400 V, CSA certified
    		  
    rated operational power in W
    2200 W AC-3 at 240 V conforming to IEC 60947-3 appendix A
    2200 W AC-3 at 400 V conforming to IEC 60947-3 appendix A
    2200 W AC-4 at 240 V conforming to IEC 60947-3 appendix A
    2200 W AC-4 at 400 V conforming to IEC 60947-3 appendix A
    		  
    electrical durability
    300000 cycles AC-3, 2200 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    300000 cycles AC-3, 2200 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    300000 cycles AC-4, 2200 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    300000 cycles AC-4, 2200 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    500000 cycles AC-3, 1500 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    500000 cycles AC-4, 1500 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    800000 cycles AC-3, 1500 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    800000 cycles AC-4, 1500 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
    		  
    terminals description ISO n°1
    (23-24)NO
    (43-44)NO
    (33-34)NO
    (13-14)NO
    		  
    terminals description ISO n°2
    (21-22)NC
    (11-12)NC
    (31-32)NC
    		  
    terminal identifier
    (13-14)NO
    (11-12)NC
    		  
    net weight
    1.26 kg
    		  
    Offer Sustainability
    REACh free of SVHC
    Yes
    		  
    EU RoHS Directive
    Pro-active compliance (Product out of EU RoHS legal scope)
    EU RoHS Declaration
    		  
    Mercury free
    Yes
    		  
    RoHS exemption information  
    China RoHS Regulation  
    WEEE
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
    		  
    Contractual warranty
    Warranty
    18 months

  • Reviews ()

    Write a Review